Cleaning appliances can be a boring and expensive task, as well as cleaning stainless steel appliances, very common in the home, especially in the kitchen. If you still do not know an effective product for this cleaning, we suggest the purchase of an exclusive cleaner for use in steel. It is a product that will protect not only your appliances, but also your hands.
Important tips if you are going to clean stainless steel
If you are going to carry out a cleaning, you should follow, in the first place, these tips:
1.A cleaning of this steel should be carried out every day, making all the elements of the material reach the maximum brightness.
2. Clean the steel should be done with slight movements and always carefullyso that they do not get damaged. It is recommended to test the method on a reduced surface first.
3. Steel elements, not even cutlery, should never be polished.
Why it is important to clean stainless Steel
This material is widely used in the kitchen for its complete resistance to heat, corrosion or stains. As always, the chromium in the steel reacts to oxygen in the air and forms a protective layer that helps prevent the appearance of rust, always reducing permanent marks. If in this case, the surface is covered with dirt or grease, this reaction does not occur, making steel a material vulnerable to the passage of time. Therefore, you must have a cleaning routine.
How to clean appliances with steel
When cleaning, you should avoid the use of products that have bleach, since they can cause significant damage. To have products that are designed to restore the shine of all steel, that finish impeccably, should be rubbed or brushed following the direction of the veins.
You must remember the protection of clothes and, especially, to keep the environment clean. The use of protective gloves and follow the rules that are included in the packaging are the main actions to consider. As a test it is recommended to use a little product on a small surface of this steel.
Tips for minor stains: daily maintenance
1. Wash the steel with plenty of hot water and a sponge.
2. If necessary, add a little detergent.
3. These tips are applied to the surface or different elements with steel. Do not forget to perform a test in a visible area.
How stainless steel marks and stains should be cleaned
If the problem is caused by marks left by the footprints or water, it should be sprayed with a little glass cleaner. Ideally, cleaning with microfiber rags, since once finished you should rinse properly and polish the surface with a dirty section or towel.
To remove stains from liquids or different foods that are dry, a cream or grease cleanser will be applied to the surface with a sponge. If desired, you can opt for a toothbrush to clean hard-to-reach places.
If the removal of stubborn stains is desired, sodium bicarbonate should be used. The mixture of a tablespoon and a little water will be enough for the formation of a thick paste. Then, apply a layer of paste on the stain and leave half an hour is enough. After that, wiping the surface with a cloth and letting the steel dry is sufficient.
Polishing and protection when cleaning appliances with steel
If the steel is seen to be scratched or opaque, it can be polished to improve its appearance and should return the protection it offers. Some of the options are these:
- Buy specialized wax and follow the instructions of the product.
- Think of natural alternatives: vinegar or lemon juice, passing it on the surface. You can also apply a concentrated solution with a sprayer.
- Use oil: apply a small amount on dry rags and go over the entire surface following the direction of the veins. After that, leave the oil for a few minutes and dry it with kitchen paper.
If it stays in good condition, cleaning the steel is easy. If you want to prevent spots, you have to:
- Clean the stains to avoid some permanent.
- Rinse well with water after application of any product.
- Keep the steel dry to avoid the marks left by the minerals in water.
Cleaning stainless steel is not a complicated task, but it does require following a series of guidelines, step by step, to clean appliances in a clear and simple way and that the different machines are not damaged. For this reason, we offer you these tips for a correct cleaning of any steel stain of Teka appliances.